Installing A Distributed Oracleas Cold Failover Cluster (Infrastructure) Configuration - Oracle Application Server B32100-01 Installation Manual

Table 8–2 (Cont.) Installing OracleAS Infrastructure in an OracleAS Cold Failover Cluster (Infrastructure)
Screen
10. Specify Instance Name
and ias_admin Password
11. --
Step 3 Perform Post-Installation Steps
The following step is required only if you meet both of these requirements:
You plan to use the Automatic Storage Management (ASM) feature of Oracle
■
Database 10g for the OracleAS Metadata Repository.
Your computer does not have an existing Oracle Database 10g.
■
If you meet these requirements, you need to configure the Cluster Synchronization
Services (CSS) daemon on the other node. The CSS daemon synchronizes ASM
instances with the database instances that use the ASM instances for database file
storage.
To configure the CSS daemon:
Stop all the processes in the OracleAS Cold Failover Cluster (Infrastructure) home.
1.
Stop the CSS daemon. You can do this by running the following command as root.
2.
# /sbin/init.d/init.cssd
Fail over the IP and the disk to the other node.
3.
On the other node, run the following command as root:
4.
# $ORACLE_HOME/root.sh
ORACLE_HOME is where you installed the OracleAS Cold Failover Cluster
(Infrastructure).
8.4 Installing a Distributed OracleAS Cold Failover Cluster
(Infrastructure) Configuration
Figure 8–2
configuration.
This configuration is similar to the configuration described in
an OracleAS Cold Failover Cluster (Infrastructure)
OracleAS Single Sign-On and Oracle Delegated Administration Services components
are installed separately on other nodes in an active-active configuration.

Installing a Distributed OracleAS Cold Failover Cluster (Infrastructure) Configuration

Action
Instance Name: Enter a name for this infrastructure instance. Instance names can
contain alphanumeric characters and the _ (underscore) character. If you have
more than one Oracle Application Server instance on a computer, the instance
names must be unique. See
Instance Names" for instance name details.
Example: infra
ias_admin Password and Confirm Password: Enter and confirm the password for
the ias_admin user. This is the administrative user for this infrastructure instance.
See Section 3.6, "The ias_admin User and Restrictions on its Password"
password requirements.
Example: welcome99
Click Next.
Finish the installation. See Section 4.28, "Install Fragment: The Last Few Screens of
the Installation" for details.
shows a distributed OracleAS Cold Failover Cluster (Infrastructure)
Installing in High Availability Environments: OracleAS Cold Failover Cluster 8-11
Section 3.5, "Oracle Application Server Instances and
Configuration", except that the
for
Section 8.3, "Installing