Packard Bell EasyNote ST Disassembly Manual page 18

1717171717
5. Disconnect the optional Bluetooth cable from the header on the main board.
6. Release the white clip securing the USB board cable and disconnect the audio board cable
from the headers on the main board.
Note: On Fig. 29, one of the headers is partly covered by the flat cable.
7. Remove the three screws securing the main board (see
8. Carefully slide the main board a bit to the right to free the DVI connector and tilt the main
board from the left.
Fig. 28 Disconnecting optional Bluetooth cable.
Fig. 29 Disconnecting USB board and audio board cables.
Packard Bell EasyNote ST Disassembly Manual
Fig. 27 on page 16).
17