1414141414
Touchpad
To remove the touchpad, first remove the top cover (see
steps:
1. Remove the four screws securing the touchpad to the top cover.
Speaker Assembly
To remove the speaker assembly, first remove the top cover (see
following steps:
1. Remove the two screws holding the speaker assembly.
Power Button / WiFi / ECO Card
To remove the power button / WiFi / ECO card, first remove the keyboard top cover (see Keyboard) and
then perform the following steps:
1. Remove the two screws holding the card.
2. Carefully disconnect the flat cable.
Packard Bell EasyNote GN45 Disassembly Manual
Top
Fig. 25 Removing the touchpad.
Fig. 26 Removing the speaker assembly.
Cover) and then perform the following
Top
Cover) and then perform the
14