Panasonic FP2 Manual page 13

FP2−CCU
1.3.3 Restrictions on Number of Units that can be Installed
The number of Computer Communication Units that can be installed is as shown in the
table below.
Unit type
Computer Communication Unit
Multi−wire Link Unit
(MEWNET−W mode)
Tip
The above restrictions do not apply to Multi−wire Link Units set to the
MEWNET−F mode and MEWNET−W2 mode.
Note
If the FP2 CPU unit is being used, make sure the restrictions
relating to the following communication conditions have been
carefully confirmed when deciding the number of units to be
installed.
When FP2 CPU unit is used
Only one.
Up to three units can be used if they
are used within the range of restric-
tions described under "section 1.4
Communication Conditions and Re-
strictions Relating to Functions".
Up to three units, in combination with
Computer Communication Units.
Functions of Computer Communication Unit
1.3 Restrictions on Units Combination
When FP2SH CPU unit is used
Up to five units, using Computer Com-
munication Units and Multi−wire Link
Unit (MEWNET−W mode) in combina-
tion.
1 − 7