Advertisement
F E A T U R E S
•
DIRECT SNMP MANAGEMENT
•
T1 AND FT1 SUPPORT
•
SINGLE V.35 DATA PORT
•
PROVIDES FDL FOR T1 IN-BAND SNMP
MANAGEMENT
•
SUPPORTS Nx56 AND Nx64 Kbps
APPLICATIONS
•
FRIENDLY ASCII (VT-100) USER INTERFACE
•
DUAL EIA-232 (DB-25) CONNECTORS FOR
ASCII INTERFACE AND NETWORK
MANAGEMENT
•
SLIP OR PPP MANAGEMENT CONNECTION
PROTOCOL
•
MIB II AND ENTERPRISE MIB SUPPORT
•
TELNET
•
5-YEAR WARRANTY, RETURN TO FACTORY
DSU-7110-2-0897
PORTS AND CONNECTORS
The 7110 provides a single V.35 connector for connection of a router or
other data equipment (DTE). The ASCII terminal port can support either
a direct connect ASCII terminal for local setup and diagnostics, or a
modem connection for remote access to the terminal port for setup
and diagnostics. The management port can be directly connected to an
SNMP manager, an ASCII terminal or printer for alarms to be printed,
or connected to a router port or external LAN adapter for SNMP
management.
7110 SPECIFICATIONS
Approvals
FCC Part 15: Class A digital device
FCC Part 68: Refer to the equipment's label for Registration
Number
Listed UL 1950
Certified CSA 1080.0 M1983
Safety: Certified Component CSA 22.2, No. 950-M93
Emissions Class A digital apparatus
Clock Sources
T1 network interface, port, or internal clock
Environment
Operating Temperature: 32° to 122° F (0° to 50° C)
Storage Temperature: -4° to 158° F (-20° to 70° C)
Relative Humidity: 5% - 95% (non-condensing)
Shock and Vibration: Withstands normal shipping and
handling
Network T1 Interface
Physical Interface (USA): RJ48C
Physical Interface (Canada): CA81A using adapter cable
(Optional feature 3100-F1-501)
Framing Format: D4, ESF
Coding Format: AMI, B8ZS
Line Build-Out (LBO): 0.0 dB, -7.5 dB, -22.5 dB
ANSI PRM: Selectable
Bit Stuffing: FCC Part 68, AT&T TR 62411
Loopbacks
Standard: AT&T TR 54016, AT&T TR 62411,
ANSI T1.403.1989
Additional: LLB (Line Loopback), PLB (Payload Loopback),
RLB (Repeater Loopback), DTLB (Data Terminal Loopback),
DCLB (Data Channel Loopback), V.54 Loop 2 and Loop 3,
ANSI T1.403 Annex B Fractional T1 Loopback
Front Panel Indicators
System LEDs:
OK = Normal Operation
FAIL = Fault in DSU
TEST = Test in Progress
Network LEDs:
SIG = Signal Present
OOF = Out of Frame
ALARM = Alarm Condition
EER = Excessive Error Rate
Port LEDs:
TXD = Transmit Data
RXD = Receive Data
RTS = Request To Send
CTS = Clear To Send
DTR = Data Terminal Ready
NMS Compatibility
SNMP Network Manager
For additional information on this or any Paradyne product or service, contact the office nearest you. Or, dial toll-free (USA)
800 PARADYNE or call 813 530-8623. Fax (USA) 813 530-8216.
Toronto 905 709-5000 fax: 905 709-3469
Europe 44-1-753-515000 fax: 44-1-753-550011
Hong Kong 852 2543-0083 fax: 852 2541-3767
Singapore 65 355-5230 fax: 65 355-5244
Specifications subject to change without notice. Printed in U.S.A. ©Paradyne Corporation 1997.
ACCULINK is a registered trademark of Paradyne Corporation. PARADYNE and Performance Wizard are trademarks of Paradyne
Corporation. All other products or services mentioned are the trademarks, service marks, registered trademarks, or registered service
marks of their respective owners.
Terminal
Modem
Power
or
Terminal/Management
POWER
!
or
ASCII
NMS Host
Terminal
or Printer
IP Connectivity
Up to 20 routes
MIB II Object Groups Supported
I.
ICMP group
II.
Interfaces group:
• T1 network
• DTE Data port
• Terminal port
• Management port
III. IP group
IV. SNMP group
V. System group
VI. TCP group
VII. Transmission group:
• T1 network - DS1/E1 MIB
• DTE Data port - RS-232-like MIB
• Terminal port - RS-232-like MIB
• Management port -RS-232-like MIB
VIII. UDP group
DTE Port Interface
Standards: 34-pin connector (socket) ITU V.35 (ISO 2593)
Rates: Nx64: 64 Kbps - 1.536 Mbps
Nx56: 56 Kbps - 1.344 Mbps
Management Port
25-pin DB-25 connector (socket)
EIA-232 / ITU V.24 (ISO 2110)
Management Port Data Rates
9.6, 14.4, 19.2, 28.8, and 38.4 Kbps
Synchronous/Asynchronous
2.4, 4.8 asynchronous only
Terminal Port
25-pin DB-25 connector (socket)
EIA-232 / ITU V.24 (ISO 2110)
Terminal Port Data Rates
2.4, 4.8, 9.6, 14.4, 19.2, 28.8, and 38.4 Kbps
Async Terminal
ANSI X3.64/VT-100 compatibility
Data Rate: 2.4, 4.8, 9.6 (Default), 14.4, 19.2, 28.8, and
38.4 Kbps
8 bits per character, 1 stop bit, no parity
Housing
Height: 2.13" (54.1mm)
Width: 9.14" (231.2mm)
Depth (case): 6.15" (157.5mm)
Depth (case and connectors): 6.51" (164.3mm)
Power Consumption and Dissipation
4.5 watts, 15.4 BTU/hr. at 120V AC
Power Requirements
120V AC ± 12V AC
60 Hz ± 3 Hz
Montreal 514 288-0001 fax: 514 288-1246
Japan 81 3-5541-6630 fax: 81 3-5541-6631
Latin America 813 530-8358 fax: 813 532-5240
Visit the Paradyne Power Pages at http://www.paradyne.com
V. 35 DTE
Data Port
NETWORK
D
T
E
or
Router Port,
User Data
Network
LAN Adapter
Ports
or Modem
Advertisement
