Table of Contents
Advertisement
2) Move to "DHCP..." by pressing
SWITCH to set to DHCP.
06/01/03
13:14:00
DHCP ACCESS
DNS 1
168.126.63.001
DNS 2
168.126.63.002
3) DNS 1 and DNS 2 will be automatically set to DNS as shown below.
Use
KEY to change it.
4) After setting, move to the main screen by using the MENU BOTTOM.
5) Set values will be stored as shown below. It takes 2 or 4 seconds.
06/01/03
13:14:00
NETWORK SETTING
On completion of setting to DHCP setup, the screen, [D] is displayed.
If the network connection is cancelled or cut, [D] starts blinking.
6) You can view the video source of the SSC17WEB from a remote location PC.
7) Make sure the remote PC meets the minimum specification requirements described in
chapters 1 and 2, and make sure that the PC is internet capable and set up to be able to
browse the internet.
at NETWORK ACCESS, then press
[D]
CAM1
Eng-33
KEY
13:14:00
Advertisement
Table of Contents
