Preface; Conventions And Symbols; Qualified Persons - Siemens WiPS-200 Series Installation Manual

IGWiPS200-1

PREFACE

CONVENTIONS AND SYMBOLS

The following symbols may be used in this manual and may appear on the equipment. The reader should become
familiar with the symbols and their meaning. Symbols are provided to quickly alert the reader to safety related text.
Symbol
DANGER
WARNING
CAUTION
CAUTION
NOTICE
IMPORTANT
Note

QUALIFIED PERSONS

The described equipment should be installed, configured, operated, and serviced only by qualified persons thoroughly familiar
with this manual. A copy of this manual is supplied with the equipment. The current version of the manual, in Portable Document
Format (PDF), can be downloaded from the Siemens Internet site; see Product Support in this manual.
For the purpose of this manual and product labels, a qualified person is one who is familiar with the installation, assembly,
commissioning, and operation of the product, and who has the appropriate qualifications for said activities such as:
•
Training, instruction, or authorization to operate and maintain devices/systems according to the safety standards for
electrical circuits, high pressures, and corrosive, as well as, critical media.
2
Meaning
Indicates an immediate hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
Indicates a potentially hazardous situation which, if not avoided, may result in property
damage.
Indicates a potential situation which, if not avoided, may result in an undesirable result or
state.
Identifies an action that should be taken to avoid an undesirable result or state.
Identifies supplemental information that should be read before proceeding.
Electrical shock hazard – Either symbol indicates the presence of an electrical shock
hazard. The associated text states the nature of the hazard.
Explosion hazard – Symbol indicates that the danger of an explosion hazard exists. The
associated text states the nature of the hazard.
Electrostatic discharge – The presence of this symbol indicates that electrostatic
discharge can damage the electronic assembly.
Pinch hazard – Symbol indicates that a pinch hazard exists if correct procedures are not
followed.
May 2007