Safety Rules For Circular Saws - Skil MAG77LT Operating/Safety Instructions Manual

Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the power tool's operation. If damaged,
have the power tool repaired before use.
Cutting procedures
Keep hands away from
cutting area and the blade.
Keep your second hand on auxiliary handle,
or motor housing.
Do not reach underneath the workpiece.
Adjust the cutting depth to the thickness of
the workpiece.
Never hold piece being cut in your hands
or across your leg. Secure the workpiece to
a stable platform.
Hold the power tool by insulated gripping
surfaces only, when performing an
operation where the cutting tool may
contact hidden wiring or its own cord.
When ripping, always use a rip fence or
straight edge guide.

Safety Rules for Circular Saws

Read all safety warnings and all instructions.
Keep cutting tools sharp and clean.
Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Service
Have your power tool serviced by a qualified
repair person using only identical
replacement parts.
Always use blades with correct size and
shape (diamond versus round) of arbor
holes.
Never use damaged or incorrect blade
washers or bolt.
Inspect the condition and quality of the
wood and remove all nails from lumber
before cutting.
Hold the saw firmly to prevent loss of
control.
Depending upon use, the switch may not
last the life of the saw. If the switch should
fail in the "OFF" position, the saw may not
start. If it should fail while the saw is
running, the saw may not shut off.