Additional Safety Warnings - Skil MAG77LT Operating/Safety Instructions Manual

Check the operation of the lower guard
spring. If the guard and the spring are not
operating properly, they must be serviced
before use.
Lower guard should be retracted manually
only for special cuts such as "Plunge
Cuts" and "Compound Cuts".
Do not use AC only rated tools with a DC
power supply.
Keep handles dry, clean and free from oil
and grease.
Use clamps or other practical way to secure
and support the workpiece to a stable
platform.
Develop a periodic maintenance schedule
for your tool. When cleaning a tool be
careful not to disassemble any portion of
the tool since internal wires may be
misplaced or pinched or safety guard return
springs may be improperly mounted.
Always observe that the lower guard is
covering the blade before placing saw
down on bench or floor.
Do not run the tool while carrying it at your
side. Lower guard may be opened by a
contact with your clothing.
Periodically remove the blade, clean the
upper, lower guards and the hub area with
kerosene and wipe it dry, or blow it clean
with compressed air.

Additional Safety Warnings

drilling, and other construction activities
contains chemicals known to cause cancer,
birth defects or other reproductive harm.
Some examples of these chemicals are:
Some dust created by power
sanding, sawing, grinding,