SonicWALL NSA E6500 Getting Started Manual page 32

3. Point the Web browser on your computer to
192.168.168.168. The SafeMode management interface
displays.
4. If you have made any configuration changes to the security
appliance, select the Create Backup On Next Boot
checkbox to make a backup copy of your current settings.
Your settings will be saved when the appliance restarts.
5. Click Upload New Firmware, and then browse to the
location where you saved the SonicOS Enhanced firmware
image, select the file and click the Upload button.
6. Select the boot icon in the row for one of the following:
• Uploaded Firmware - New!
Use this option to restart the appliance with your
current configuration settings.
• Uploaded Firmware with Factory Defaults - New!
Use this option to restart the appliance with default
configuration settings.
7. In the confirmation dialog box, click OK to proceed.
8. After successfully booting the firmware, the login screen is
displayed. If you booted with factory default settings, enter
the default user name and password (admin / password) to
access the SonicWALL management interface.
If You Are Following
Scenario...
A - NAT/Route Mode
Gateway
Proceed to Section:
Additional Deployment
Configuration - page 41
If You Are Following
Scenario...
B - NAT with State Sync Pair
C - L2 Bridge Mode
SonicWALL NSA E6500 Getting Started Guide
Proceed to Section:
Configuring a State Sync Pair
in NAT/Route Mode
- page 32
Configuring L2 Bridge Mode
page 39
-
Page 31