SonicWALL NSA E6500 Getting Started Manual page 22

Scenario A: NAT/Route Mode Gateway
A
For new network installations or installations where the
SonicWALL NSA E6500 is replacing the existing network
SonicWALL NSA E-Class
gateway.
ISP 1
Internet
In this scenario, the SonicWALL NSA E6500 is configured in
NAT/Route mode to operate as a single network gateway. Two
Internet sources may be routed through the SonicWALL
SonicPoint
appliance for load balancing and failover purposes. Because
only a single SonicWALL appliance is deployed, the added
benefits of high availability with a stateful synchronized pair are
LAN Zone
DMZ Zone WLAN Zone
not available.
To set up this scenario, follow the steps covered in the Initial
section
Setup . If you have completed setup procedures in that
section, continue to the Additional Deployment Configuration
section, on page 41
to complete configuration.
SonicWALL NSA E6500 Getting Started Guide Page 21