Thermador PODMW301J Use And Care Manual page 28

Lift the door up and pull out at an upward angle as
9.
shown in the following illustration. The notch in the
hinge foot will disengage from the oven door frame.
With both door hinge feet disengaged, lift the door off
the unit.
Carefully move the door to a safe place to protect it
10.
from damage until you are ready to reinstall it.
28
Replacing the Oven Door
To replace the oven door:
Hold the door firmly in both hands at a 30° angle to
1.
the front of the unit.
Guide the door hinges into the hinge slots on the unit
2.
housing.
Slide the door in until the slots on the hinges engage
3.
the oven housing. Hint: it may be necessary to rock
the door slightly to seat it correctly.
Lower the door into the fully open 90° position. If the
4.
door will not lower all the way to the 90° position, the
hinges are not correctly seated. The door should be
straight, not crooked.
Push the locking toggles back into the unlocked
5.
position, toward the oven cavity.
Reinstall the locking plates and screws (see door
6.
removal process above).
Close the door gently. It should close all the way.
7.
Gently open and close the door several times to be
sure it is correctly installed and securely in place.