Toshiba ST-A20 SERIES Owner's Manual page 13

2. APPEARANCE
Connector
AC inlet
PS/2 (Mouse, Keyboard) Mini-DIN 6-
pin female type connector
USB: General 5V USB X 6
USB: 24V Powered
USB: 12V Powered
LAN
BIU connector
RIU connector
Cash drawer
Speaker & Mic
VGA
COM 1, 2
COM 3
LVDS connector
MCR connector
A connector for the AC inlet
Connector for the PS/2 type mouse, Connector for the
PS/2 type keyboard
Connector for the USB (Universal Serial Bus) interface
USB V2.0/1.1 and UHCI (Conforming to Universal Hub
Controller Interface V2.0/1.1)
NOTE: USB functions may not be supported
X 1
X 2 USB 6 ports can be used as general 5V USB
connectors. Powered USB is a USB socket supplied
with power, which is 1 port of 24V USB and 2 ports of
12V USB.
Modular type connector for the 10BASE T/100BASE-
TX LAN interface, RJ-45 modular connector (with LED)
Connector for integrated Vacuum Fluorescent Display
NOTE: When BIU is installed on the POS
Connector for external Vacuum Fluorescent Display
NOTE: When RIU is installed on
A 24V type TEC interface drawer is connectable
Connectors for Speaker and Mic
Expandable VGA interface. 15-pin VGA female type
connector
D-sub 9-pin male type connector (without power)
D-sub 9-pin female type connector (with power)
A connector for Tablet
A connector for magnetic card reader (MCR)
Description
depending on the Operating System.
terminal, RIU is not available.
the POS terminal, BIU is not available.
2-7
EO1-12037
2.4 Connectors