Product Features • Split or expand a DisplayPort signal on two DisplayPort (B156-002), DVI (B156-002-DVI), or HDMI (B156-002-HDMI) monitors • Supports video resolutions up to 1920 x 1080 @ 60Hz (or 3840 x 1080 @ 60Hz when monitors are set to extended mode) • Supports 30-bit Deep Color (10-bits per channel)
Mounting Instructions The B156-002, B156-002-DVI, and B156-002-HDMI come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods.
16 ft. (5 m). Connect the included external power supply to the splitter, and plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU), or Uninterruptible Power Supply (UPS). The Green Power LED on the splitter will illuminate to indicate the unit is receiving power.
Was the power to the DisplayPort source turned off prior to installation? If not, restart your computer. What resolution are you trying to reach? Tripp Lite’s DisplayPort Splitters are tested to support up to 1920 x 1080 @ 60Hz video resolution (or 3840 x 1080 @ 60Hz when monitors are set to Extended mode).
Page 6
DisplayPort cables between a source and monitor that you know works to see if the cable is functioning. Are you using a VGA to DVI adapter with the B156-002-DVI? The B156-002-DVI supports DVI-D (Digital) only, and will not function if connected to a VGA monitor.
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Page 8
Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide. Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.