Job Status Feedback - Xerox DocuPrint 92C System Overview Manual

Client
workstation Operating
hardware system
Apple Apple OS
Macintosh
IBM RS/6000 IBM AIX
HP/Apollo HP-UX

Job status feedback

Platform
Sun workstation
IBM and compatible
personal computers
Apple Macintosh
IBM RS/6000 and HP/
Apollo
System Overview Guide
Table 4-1. Clients (Continued)
Ethernet
connection
Optional
Ethernet
interface
Standard
Standard
Client workstations display fault messages and additional
information, such as the status of feeder trays and output bins. If
properly configured, the workstations may be able to display job
status, as shown below.
Table 4-2. Job status feedback
Job status capability
Job status and job deletion are available by issuing the appropriate
command at the command line.
Job status information is available for jobs submitted using Xerox Client
Software.
Job status and job deletion are available depending on the TCP/IP
software installed on the workstation. You must issue the appropriate
command at the command line.
Job status information is available for jobs submitted using Xerox Client
Software.
Job status information is available using the Novell PCONSOLE utility if
the printer is configured with a RPRINTER or PSERVER enabled.
Job status information is available at the workstation through AppleTalk.
Job status information is available for jobs submitted using Xerox Client
Software or Ipstat (native utility).
To determine the status of jobs submitted using the lpr
command, you must issue an lpq command at the command line.
Some application software packages may provide a simplified
means of obtaining job status, such as through the use of icons.
Network printing environment
Protocol;
Translation Job submission
requirements method
AppleTalk using Print directly from
EtherTalk Phase I or application or use Xerox
II; none DocuPrint Print
Submission Client
software for the
Macintosh.
TCP/IP; Print using Xerox Client
none Software.
TCP/IP; Print using Xerox Client
none Software.
4-5