Yamaha YZFR6V(C) Owner's Manual page 65

1. Engine oil filler cap
6. Insert and tighten the engine oil
dipstick, and then install and tight-
en the oil filler cap.
To change the engine oil (with or
without oil filter cartridge replace-
ment)
1. Remove cowling C. (See page
6-9.)
2. Start the engine, warm it up for
several minutes, and then turn it
off.
3. Place an oil pan under the engine
to collect the used oil.
4. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Engine oil drain bolt
NOTE:
Skip steps 5–11 if the oil filter cartridge
is not being replaced.
5. Remove the shift arm by removing
the bolt.
6. Pull the fuel tank breather/overflow
hoses upward to remove them
from the guide.
6-15
1. Bolt
2. Shift arm
3. Engine oil filter cartridge
4. Guide
5. Fuel tank breather hose (except for Califor-
nia)
6. Fuel tank overflow hose
7. Remove the oil filter cartridge with
an oil filter wrench.
1. Oil filter wrench
6