Yamaha YZFR6V(C) Owner's Manual page 27

Display brightness and shift timing
indicator light control mode
1. Display brightness
2. Shift timing indicator light activation/deacti-
vation
3. Shift timing indicator light
This mode cycles through five control
functions, allowing you to make the fol-
lowing settings in the order listed be-
low.
G
Display brightness:
This function allows you to adjust
the brightness of the displays and
tachometer to suit the outside
lighting conditions.
INSTRUMENT AND CONTROL FUNCTIONS
G
Shift timing indicator light activity:
This function allows you to choose
whether or not the indicator light
should be activated and whether it
should flash or stay on when acti-
vated.
G
Shift timing indicator light activa-
tion:
This function allows you to select
the engine speed at which the indi-
cator light will be activated.
G
Shift timing indicator light deactiva-
tion:
This function allows you to select
the engine speed at which the indi-
cator light will be deactivated.
G Shift timing indicator light bright-
ness:
This function allows you to adjust
the brightness of the indicator light
to suit your preference.
NOTE:
In this mode, the right display shows
the current setting for each function
(except the shift timing indicator light
activity function).
3-9
To adjust the brightness of the multi-
function meter displays and tachometer
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
ton.
3. Turn the key to "ON", and then re-
lease the "SELECT" button after
five seconds.
4. Push the "RESET" button to select
the desired brightness level.
5. Push the "SELECT" button to con-
firm the selected brightness level.
The control mode changes to the
shift timing indicator light activity
function.
To set the shift timing indicator light ac-
tivity function
1. Push the "RESET" button to select
one of the following indicator light
activity settings:
G The indicator light will stay on
when activated. (This setting
is selected when the indicator
light stays on.)
3