Vax Ultima Cyclonic VZL-101 Instruction Manual page 5

Vax VZL 101 User Guide.qxd
Floor/Carpet Cleaning
Move the handle and adjust it to the desired position for
(a) storing the upright, (b) operating the cleaner, and (c)
de-press the handle release pedal again to clean under
furniture. NOTE: Brushbar could cause rug fringe area to
become tangled within cleaner. Use caution when
vacuuming throw rugs with fringe.
Fig.4/4
Using the Accessories
Cleaner must be in its
upright position to raise brushbar. Turn carpet height
adjuster to long carpet pile setting (Fig.4/5).
Carpet height adjuster
Fig.4/5
Press the wand release button and pull the handle and
wand out of the slot. Fig.4/6).
Fig.4/6
4/10/07 09:03 Page 5
Any of the accessories can be directly attached to the
end of the extension wand.
The extension wand length can be adjusted by pressing
the release button forward and sliding the wand end up
or down. Take pressure off release button when desirable
wand length has been found. (Fig 4/7).
Fig.4/7
Simply push the attachment firmly onto the end of the
extension wand. To remove tool, twist and pull apart
gently (Fig.4/8).
Fig.4/8
The TurboTool is ideal for removing pet hair from stairs
and upholstery. The TurboTool is most effective when
using backward strokes over the area that
is being cleaned .
Carry Handle
Use the carry handle located on the top of the dirt
container lid to move the cleaner from room to room
(Fig.4/9).
Fig.4/9
Vax Careline 0870 606 1248
5
how to operate