Valcom IP Solutions VIP-9880 User Manual

IP FlexHorn with Square Grille
INTRODUCTION
The VIP-9880 IP FlexHorn with grille enables
loudspeaker voice paging anywhere on an
Ethernet network. The VIP-9880 consists of a
high efficiency Class-D Horn and a Network
Interface, allowing stand alone capability when
used with a SIP-enabled telephone system or can
be accessed from a variety of Valcom managed
VoIP products. Power is provided to the
VIP-9880 via a Power over Ethernet (PoE) switch
meeting the 802.3af specification.

SPECIFICATIONS

Access Methods

SIP-enabled telephone system

PBX, FXO Port w/VIP-811

POTS telephone set w/VIP-811

PBX, FXS Port w/VIP-821

Valcom M Cast Page Group
Features

RJ-45 for network connection

Network activity LEDs

Power over Ethernet 802.3af compatible

White painted steel faceplate
Dimensions/Weight

10.75" H x 10.75" W x 4.0" D
(27.3cm H x 27.3cm W x 10.2cm D)

Weight: 3.1 lbs. (1.4 kg)
Nominal Specifications
Input Impedance:
Input Level:
Output Impedance:
Output Level:
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
VIP-9880
600 Ohms
-10dBm
600 Ohms
-10dBm nominal
Class 3
1
Environment
Temperature:
Humidity:

Packing List

Qty
1 VIP-9880 IP FlexHorn w/Grille
1 VSP Document
Precautionary Designations
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
ISSUE 2
0 to +40° C
0 to 85% non-precipitating
Item
947731