Model UT804: OPERATING MANUAL
3. When the readings obtained is:
l < 4mA, the primary display shows LO
l 4mA, the primary display shows 0%. ....
l 20mA, the primary display shows 100%
l > 20mA, the primary display shows HI
Note
l
When the measured current is 5A, continuous
measurement is allowed.
l
When the measured current is between 5A-10A,
continuous measurement 10 seconds and interval
more than 15 minutes.
l
Do not attempt to measure higher than 10A.
l
When measurement has been completed, disconnect
the connection between the testing leads and the
circuit under test and remove the test leads away
from the input terminals.
45