Selecting The Range; Understanding The Display; Display Features - UNI-T UT804 Operating Manual

Model UT804: OPERATING MANUAL

Selecting the Range

Press RANGE to enter manual ranging mode and select
Figure 2-2. Display Features
a fixed range.
Autoranging (AUTO lighted in the display) always comes
on initially when you select a new function. In autorange,
the Meter selects the lowest input range possible,
ensuring that the reading appears with the highest
available resolution.
If AUTO is already on, press RANGE to enter MANUAL
ranging in the present range. You can then select the
next manual range each time you press RANGE.
Return to autoranging by press EXIT.
Press RANGE when turning on the Meter, the Meter
enters the analogue resistance signal measurement
mode.

Understanding the Display

Display features are shown in Figure 2-2 and described
in Table 2-4.
20