Temperature Measurement - UNI-T UT50E Operating Manual

Measurement Operation(11)
Note
l When Hz measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test.
H. Temperature Measurement
( figure 8)
Warning
To avoid harm to you or damages to the Meter, do
not attempt to measure voltages higher than 60V in
DC or 30V rms in AC although readings may be
obtained.
The temperature measurement range is from -40
o
1000 C. To measure temperature, connect the Meter
as follows:
1. Insert the red temperature into the V
and the black temperature probe into the COM terminal.
2. Set the rotary switch to
3. Place the temperature probe to the object being
measured.
The measured value shows on the display.
Model UT50E: OPERATING MANUAL
(see figure 8)
red
o
C.
23
black
o
C~
o
Cterminal