Making Measurements; Introduction; Measuring Voltages - UNI-T UT71C Operating Manual

Model UT71C/D/E: OPERATING MANUAL
Chapter 3
Making Measurement

Introduction

Chapter 3 explains how to make measurements. Most
measurement functions can be selected by using the
rotary switch.
While letters or symbols identify primary functions; blue
letters or symbols identify alternative functions. Press
the BLUE button to access these alternate functions.
A. Measuring Voltages
Warning
To avoid harms to you or damages to the Meter
from electric shock, please do not attempt to
measure voltages higher than 1000V, although
readings may be obtained.
Figure 3-1. Voltages Measurement
To measure voltages, set up the Meter as Figure 3-1
and do the following:
30