UNI-T UT71C Operating Manual page 20

Model UT71C/D/E: OPERATING MANUAL
Button
SEND In Store, each press to decrease a second on the storing
MAXMIN
interval.
Press EXIT to exit
Press to enter relative mode, the primary display shows
REL
The left secondary display shows the present measurement
value. The right secondary display shows the stored value.
The primary display shows the present measurement value
minus the stored value.
Press EXIT to exit relative mode.
In Setup, each press to increment an Option.
In Recall, each press to recall the next stored reading.
In Store, each press to increase a second on the storing interval.
Table 2-2. Functional Buttons
Description Access Method
. Press the button once.
Press and hold the button for over 1
second.
19