Front Panel - Thecus N5200B, N5200BR User Manual

Front Panel

The Thecus N5200's front panel has the device's controls, indicators, and hard
disk trays:
Front Panel
Item
1.DOM LED
2.WAN LED
3.LAN LED
4.USB Copy LED
5.Busy LED
6.USB Port
7.Power Button
8.Reset Button
9.HDD Trays
10.LCD Display
11.Up Button
12.Down Button
↵
13.Enter Button
14.Escape Button
ESC
Description
• Solid orange: system is being upgraded or system startup;
data currently inaccessible
• Solid green: network link
• Blinking green: network activity
• Solid green: network link
• Blinking green: network activity
• Solid blue: files are being copied from a USB storage device
• Blinking red: Raid volume in degrade mode or demage
• USB 2.0 port for compatible USB devices, such as USB disks,
USB printers, and USB wireless dongles*
Note: For supported USB wireless dongles, please contact
http://esupport.thecus.com/support
• Power on/off N5200
• Solid blue: Device is powered on
• Blinking blue: eSATA hard disk is connected and active
• Resets the N5200
• Press for five seconds during boot process to reset IP address
and admin password
• Five 3.5" SATA HDD trays
• Locks are provided for added security
• Displays current system status and warning messages
• Displays hostname, WAN/LAN IP address, RAID status, and
current time
• Push to scroll up when using the LCD display
• Push to scroll down when using the LCD display
• Push to confirm information entered into the LCD display
• Push to leave the current LCD menu
10