Bios Security Menu - TYAN Thunder K8W S2885 User Manual

3.05 – BIOS Security Menu
The system can be configured so that all users must enter a password every
time the system boots or when BIOS Setup is entered, using either the
Supervisor password or User password. The Supervisor and User passwords
activate two different levels of password security. If you select password support,
you are prompted for a one to six character password. Type the password on the
keyboard. The password does not appear on the screen when typed. Make sure
you write it down. If you forget it, you must clear CMOS and reconfigure.
Main Advanced
Security Setting
Supervisor Password:
User Password:
Change Supervisor Password
Change User Password
Clear User Password
Boot Sector Virus Protection
Feature
Supervisor Password:
User Password:
Change Supervisor
Password
Change User Password
Clear User Password
BIOS Setup Utility
PCI/PnP Boot
Exit
[Disabled]
Option
Not Installed
Installed
Not Installed
Installed
46
WWW.TYAN.COM
Security Chipset
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
Use [+] or [-] to
configure system
time.
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Description
If the password has been set,
Installed displays. If no
password is set, Not Installed
displays.
If the password has been set,
Installed displays. If no
password is set, Not Installed
displays.
Select this option to change
Supervisor Password
Select this option to change
User Password
Select this option to clear User
Password
Power