TYAN Thunder K8W S2885 User Manual page 39

Remote Access Configuration Sub-Menu
You can use this screen to view the Remote Access Configuration Menu. This
feature allows access to the Server remotely via serial port. Use the up and down
arrow ( á/â) keys to select an item. Use the Plus and Minus (+/-) keys to change
the value of the selected option. The settings are described on the following
pages.
Main Advanced
Remote Access Configuration
Remote Access
Terminal Type
Serial Port Number
Serial Port Mode
8,n,1]
Flow Control
Post-Boot Support
Feature
Remote Access
Terminal Type
Serial Port Number
Serial Port Mode
Flow Control
Post-Boot Support
BIOS Setup Utility
PCI/PnP Boot
Exit
Option
Disabled
Enables remote access to system
Serial through serial port
ANSI
Sets the type of terminal used for remote
VT100 access
COM1
Determines which serial port will be used
for remote access
COM2
115200 8n1
Sets the speed of data to terminal
57600 8n1
19200 8n1
9600 8n1
Hardware
Enables hardware flow control to protect
None buffer overflow
Disabled
Keeps redirection active after booting to
Enabled DOS
39
WWW.TYAN.COM
Security Chipset
Use [ENTER],
[TAB] or
[SHIFT_TAB] to
[Serial]
select a field
[ANSI]
Use [+] or [-] to
[COM1]
configure system
[115200
time.
+/-
[Hardware]
Field
[Disabled]
Tab Select Field
F1
F10 Save and
Exit
ESC Exit
Description
Power
Change
Help