Finishing Up - TYAN Thunder K8W S2885 User Manual

Make sure you have connected both connectors before attempting to apply
power to the board.
2.13 – Finishing Up
Congratulations on making it this far! You're finished setting up the hardware
aspect of your computer. Before closing up your chassis, make sure that all
cables and wires are connected properly, especially IDE cables and most
importantly, jumpers. You may have difficulty powering on your system if the
motherboard jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by
asking your vendor for assistance. If they are not available for assistance, please
find setup information and documentation online at our website or by calling your
vendor's support line.
27
WWW.TYAN.COM