Triumph Bonneville Handbook page 64

1
T908034
1. Adjuster (engine end)
Adjustment
Loosen the knurled locknut at the
•
lever end of the clutch cable and turn
the adjuster sleeve until the correct
amount of clutch lever free- -play is
achieved.
Tighten the knurled locknut against
•
the clutch lever assembly.
If the correct adjustment setting
•
cannot be achieved using the lever
adjuster, use the adjuster at the
engine end of the cable.
Maintenance and Adjustment
Page 63
Loosen the adjuster locknut.
•
Turn the outer cable adjuster to give
•
2- -3 mm of free- -play at the clutch
lever.
Tighten the locknut.
•
Use the lever adjuster to make minor
•
adjustments as necessary.
Ensure all locknuts are secured at
•
both ends of the cable.