Triumph Bonneville Handbook page 86

Hide thumbs Also See for Bonneville:
Table of Contents

Advertisement

2
1
T908048
1. Headlight Rim Screws
2. Headlight Bowl
Headlight/Position
Replacement
Disconnect the battery, negative
(black) lead first.
Remove the headlight rim screws.
Detach
the
assembly from the headlight bowl.
While supporting the light unit,
disconnect the multi- -pin electrical
connector from the headlight bulb and
the two spade connectors from the
position light.
Remove the rubber dust cover.
Unhook the headlight bulb's wire
retainer.
The headlight bulb can now be
removed.
To remove the position light bulb,
detach the bulb holder from the
headlight body and release the bulb.
Installation is the reversal of removal.
Maintenance and Adjustment
Light
Bulb
headlight
and
rim
Page 85
2
T908049
1. Wire Retainer
2. Headlight Bulb
3. Position Light
WARNING: Do not reconnect
the battery until the assembly
process
has
Premature
battery
could result in ignition of the battery
gases causing risk of injury.
!!
WARNING:
!
becomes hot during use.
Always allow sufficient time for the
bulb to cool before handling.
Avoid touching the glass part of the
bulb. If the glass is touched or gets
dirty, clean with alcohol before
!!
re- - use.
!
CAUTION:
reconnecting
connect the positive (red) lead first.
!!
!
1
3
been
completed.
reconnection
The
bulb
When
the
battery,

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bonneville t100AmericaSpeedmasterThruxton

Table of Contents