Maintenance and Adjustment
Inspection
2
cbmy
1. Lever
2. Adjuster (lever end)
3. 2 - 3 mm
•
Check that there is 2 - 3 mm of
clutch lever free play at the point
shown in the diagram above.
•
If there is an incorrect amount of
free play, adjustments must be
made.
64
Adjustment
1
1. Adjuster (engine end)
1
T908034
•
Loosen the knurled locknut at the
lever end of the clutch cable and
turn the adjuster sleeve until the
correct amount of clutch lever free
play is achieved.
•
Tighten the knurled locknut at the
clutch lever assembly.
•
If the correct adjustment setting
cannot be achieved using the lever
adjuster, use the adjuster at the
engine end of the cable.
•
Loosen the adjuster locknut.
•
Turn the outer cable adjuster to give
2 - 3 mm of free play at the clutch
lever.
•
Tighten the locknut.
•
Use the lever adjuster to make
minor adjustments as necessary.
•
Ensure all locknuts are secured at
both ends of the cable.