Chain And Sprocket Wear Inspection - Triumph Tiger Handbook

Warning
Operation of the motorcycle with insecure
adjuster locknuts or a loose wheel spindle
may result in impaired stability and
handling of the motorcycle. This impaired
stability and handling may lead to loss of
control or an accident.
Check the rear brake effectiveness. Rectify if
necessary.
Warning
It is dangerous to operate the motorcycle
with defective brakes and you must have
your authorised Triumph dealer take
remedial action before you attempt to ride
the motorcycle again. Failure to take
remedial action may reduce braking
efficiency leading to loss of control or an
accident.
Maintenance and Adjustment

Chain and Sprocket Wear Inspection

2
cecx
1. Measure across 20 links
2. Weight
Remove the chain guards.
Stretch the chain taut by hanging a
10 - 20 kg weight on the chain.
Measure the length of 20 links on the
straight part of the chain from pin centre of
st
the 1 pin to the pin centre of the 21
Since the chain may wear unevenly, take
measurements in several places.
If the length exceeds the maximum service
limit of 319 mm, the chain must be replaced.
Rotate the rear wheel and inspect the drive
chain for damaged rollers, and loose pins and
links.
st
pin.
73