dRIvING uSING yOuR devICe'S aCCeleROmeTeR
To turn on this function, hold your device flat or tilted upward
slightly (see image at right), and press the
device' s screen . The manual drive button graphics will disappear
from your device' s screen .
To drive the Rover 2 . 0 , tilt your device in the direction you would like to drive . The
Stop position is the position at which the device was held when the G Drive was
activated .
To turn this function off, press the
reappear on your device' s screen .
vOlume
VOLUME
The Rover 2 . 0 can transmit audio to your device .
Press the
button and slide up and down to control the volume of audio
VOLUME
transmitting from the Rover 2 . 0 to your device .
Note: The Rover 2.0 will not transmit audio while it is in motion.
audio is only accessible when Rover 2.0 is stopped.
(for apple devices only)
button on your
button, and the drive graphics will
16