Power Up And Connect; Driving Using Your Device's Accelerometer; Audio; Stealth Night Vision - Brookstone Rover Quick Start Manual

Hide thumbs Also See for Rover:
Table of Contents

Advertisement

POWER UP AND CONNECT

1. Slide the Power switch on the bottom of the Rover to on. The ORANGE POWER
LED will illuminate. Wait approximately 30 seconds and the BLUE CONNECTION
LED will start to blink slowly.
LED STATE CHART
S
LE
D
tate
Orange
Solid
Blue
Blinking
Blue
Solid
2. On your iPod touch
®
, iPhone or iPad device, go to Settings and turn Wi-Fi on.
The SSID address of your Rover (17 digits starting with AC13_) will appear as
an available connection.
Note: Each Rover has a unique SSID address (printed on the underside of the
unit). If there are multiple Rover's being used, the individual SSID addresses will
appear as Wi-Fi connections on your device. Select your Rover's SSID address.
3. Select the Rover to confirm the connection. Ensure there is a check mark to the
left of the SSID address and the Wi-Fi connection logo appears at the top of
your device's screen.
4. Exit out of Settings and open the Rover App.
5. The BLUE CONNECTION LED will now revert from blinking to solid.
6. When your device's screen shows the view from the Rover's live-stream video
camera—you are ready to start exploring.
11
Represents
Power on
Searching for and acquiring Wi-Fi connection
Rover app is open and Wi-Fi is connected

DRIVING USING YOUR DEVICE'S ACCELEROMETER

To turn on this function, press the
button on your device's screen.
The manual drive button graphics will disappear from your device's screen.
To drive the Rover, tilt your device in the direction you would like to drive.
To turn this function off, press the
button, and the drive graphics will
reappear on your device's screen.

AUDIO

The Rover can transmit audio to your device.
Press the
button and slide up and down to control the volume of audio
transmitting from the Rover to your device.
Note: The Rover will not transmit audio while it is in motion.
Audio is only accessible when Rover is stopped.

STEALTH NIGHT VISION

Press the
button to turn the stealth night vision function on.
Press the
button again to turn the stealth night vision function off.
Note: When stealth night vision is on, the video is in black and white.
16

Advertisement

Table of Contents
loading

Table of Contents