Recording A Path/Playing A Path; Two-Way Radio; Headlights And Tail Lights - Brookstone Rover 2.0 User Manual

PATH PATH
The Rover 2 . 0 can record up to 60 seconds of a driving route, and then repeat it all
by itself!
1 . To record a path, press the Make Path
route you want to record .
2 . After you complete your route, press the Make Path
3 . Press the Play Path
automatically drive the route you recorded – all by itself .
4 . Double tap
Note: If the Rover 2.0 is reset, or the batteries are removed, the saved route
will be erased.
TALK

TWO-Way RadIO

Rover 2 . 0 can talk! Press and hold the
through the Rover 2 . 0 . Then, just release the
BRIGHTS

HeadlIGHTS aNd TaIl lIGHTS

Press the
BRIGHTS
19

ReCORdING a PaTH/PlayING a PaTH

to play the recorded route and the Rover 2 . 0 will
PATH
to play the Path in a loop . Press
PATH
button to turn the headlights and tail lights on and off .
button and drive the Rover 2 . 0 on the
PATH
PATH
to stop the Path play .
PATH
button and talk into your device to speak
TALK
button to listen .
TALK
button again to save .