Power Up And Connect - Brookstone Rover 2.0 User Manual

PoWer uP and connecT

1 . Slide the Power switch on the bottom of the Rover 2 . 0 to on . The ORANGE
POWER LED will illuminate . Wait approximately 30 seconds and the GREEN
CONNECTION LED will start to blink slowly .
led STaTe CHaRT
2 . On your device, go to Settings and turn Wi-Fi on . The SSID address of your Rover
2 . 0 (17 digits starting with ROVER) will appear as an available connection .
Note: each Rover 2.0 has a unique SSId address (printed on the underside of the
unit). If there are multiple Rover 2.0's being used, the individual SSId addresses will
appear as Wi-fi connections on your device. Select your Rover 2.0's SSId address.
3 . Select the Rover 2 . 0 to confirm the connection . (No user name or password is
required . ) Ensure the Wi-Fi connection logo appears at the top of your device' s
screen . There may or may not be a check mark to the left of the SSID address to
confirm the connection .
4 . Exit out of Settings and open the Rover 2 . 0 App .
5 . The Green CONNECTION LED will now revert from blinking to solid .
6 . When your device's screen shows the view from the Rover 2 . 0 's live-stream video
camera—you are ready to start exploring .
11
s
d
LE tate
Orange Solid
Blinking
Green
Green Solid
Represents
Power on
Searching for and acquiring Wi-Fi connection
Rover app is open and Wi-Fi is connected