Brother Multi-Protocol On-board Ethernet Multi-function Print Server Network User's Manual page 32

Configuring your machine for a wireless network
For MFC-J280W/J625DW/J825DW/J835DW and DCP-J525W/J725DW/J925DW
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
SSID (Network Name):
Communication Mode
Infrastructure
1
TKIP is supported for WPA-PSK only.
For example:
SSID (Network Name):
HELLO
Communication Mode
Infrastructure
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press Menu.
c
Press Network.
d
(MFC-J825DW/J835DW and DCP-J925DW only)
Press WLAN.
e
Press Setup Wizard.
f
When Enable WLAN? or Switch Network interface to wireless? is displayed, press Yes to
accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g
The machine will search for your network and display a list of available SSIDs. Press a or b to display
<New SSID>, and press <New SSID>.
Authentication method
Open system
Shared key
WPA/WPA2-PSK
Authentication method
WPA2-PSK
Encryption mode
WEP
NONE
WEP
AES
1
TKIP
Encryption mode
AES
Network key
—
Network key
12345678
3
3
28