Brother Multi-Protocol On-board Ethernet Multi-function Print Server Network User's Manual page 10

Changing your machine's network settings
Note
• If the print server is set to its factory default settings (if you don't use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the Node Name and MAC Address (Ethernet Address) by printing the Network Configuration
Report. (See Printing the Network Configuration Report uu page 39 for information on how to print the
Network Configuration Report on your print server.) You can also find the Node Name and MAC Address
from the control panel. (See Control panel setup uu page 34.)
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
®
Windows
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Macintosh
2
6