Confirm Your Network Environment; Connected To A Computer With A Wlan Access Point/Router In The Network (Infrastructure Mode) - Brother Multi-Protocol On-board Ethernet Multi-function Print Server Network User's Manual

Configuring your machine for a wireless network

Confirm your network environment

Connected to a computer with a WLAN access point/router in the network
(Infrastructure mode)
1 WLAN access point/router
1
If your computer supports Intel
point.
2 Wireless network machine (your machine)
3 Wireless capable computer connected to the WLAN access point/router
4 Wired computer (which is not wireless capable) connected to the WLAN access point/router with
an Ethernet cable
Install method
The following instructions will offer four methods for installing your Brother machine in a wireless network
environment. Choose the method you prefer for your environment.
 Wireless configuration temporarily using a USB cable (Recommended for Windows
See Wireless configuration temporarily using a USB cable uu page 11.
 Wireless configuration temporarily using an Ethernet cable
See Wireless configuration temporarily using an Ethernet cable (For MFC-J825DW/J835DW and
DCP-J925DW) uu page 14.
 One push wireless configuration using WPS or AOSS™
See One push configuration using Wi-Fi Protected Setup or AOSS™ uu page 17.
 Wireless configuration using the Setup Wizard from the control panel
See Configuration using the machine's control panel Setup Wizard uu page 23.
4
1
® ®
My WiFi Technology (Intel MWT), you can use your computer as a Wi-Fi Protected Setup supported access
1
3
2
®
users)
3
3
3
3
9