Operating Instructions; Articulation Button; Dust Extraction; Intended Use - Dremel 6800 Operating/Safety Instructions Manual

DM 2610010088 02-10:DM 2610010088 02-10 2/26/10 1:02 PM Page 10
shank bits were designed and optimized for
operating up to 20,000 RPM. A complete set
of cutting, sanding, and routing accessories
are available for your Dremel Trio.
Visit www.dremel.com to learn more about
what you can do with your new Dremel tool.

ARTICULATION BUTTON

Your tool also features a 2 position articulating
handle. To adjust, depress articulation button
and move head to desired position (Fig. 3 or 4).
The articulation position (Fig. 3) is
recommended for standard operations on a flat
surface. While in the 180° position (Fig. 4) it's
excellent for working in tight places, on a wall or
ceiling.

DUST ExTRACTION

(Not included, available as accessory)
Your tool is equipped with a dust port for dust
extraction. To use this feature, insert dust
This Dremel Trio tool is intended for cutting
wood up to 1/2" thick, plastic, thin sheet metal,
drywall up to 5/8 thick, fiberboard, and wall tile
using the applicable tools and accessories
recommended by Dremel. This tool also
sands using a variety of sanding drums and
routes using 3/16" shank router bits.

Operating Instructions

handle before turning the tool on.
Make sure the pivoting handle is securely
locked in the desired position. Operation when
not secured properly may result in unexpected
movement of the pivoting handle and could
cause injury.
port adapter (optional accessory) into dust
port, attach vacuum hose into the adapter,
then connect the opposite end of the hose to
a shop vacuum cleaner (Fig. 5).
10

INTENDED USE

Make sure articulation button
clicks back out to lock the