Answering Machine; Using Your Acura 3000 On A Pbx - Binatone Acura 3000 User Manual

Troubleshooting continue...

Answering Machine

The machine's memory may be full. You need to delete
"The machine
enough recorded messages to free at least one minute of
won't record
any messages" recording time. Or you can delete all recorded messages
to make room for new ones
Make sure the machine is switched on - the MESSAGE light
should be on.
Make sure you have not selected OGM2 - with OGM2
selected, callers cannot leave messages (see page 25).
"Remote
Make sure you are using the correct remote security code
operation
doesn't work."
Check that you are using a suitable tone-dialling phone.
Some cordless or mobile phones do not generate
continuous tones and so are not ideal for remote operation.
Don't leave more than 10 seconds between key presses;
otherwise, your call will be cut off.

Using your Acura 3000 on a PBX

When you first make a call, try pressing the REDIAL/ PAUSE
"Last Number
button for a pause between the outside line access digit (e.g.9)
Redial and or
memory dialling and the telephone number.
don't work on
You should later be able to redial the number.
a PBX.
When storing numbers in memory, you can include the
outside line access digit (e.g.9) and pause (P) if necessary,
with each number.
If your PBX requires you to wait for a second Dial tone before
dialling the telephone number, press the REDIAL/PAUSE
button for a pause between the access digit and the number.
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
33