Answering Machine - Binatone Speakeasy 17 User Manual

Troubleshooting continue...

Answering Machine

"The machine The machine's memory may be full. You need to delete
won't record enough recorded messages to free at least one minute of
any messages" recording time. Or you can delete all recorded messages
to make room for new ones
Make sure the machine is switched on - the MESSAGE light
should be on.
Make sure you have not selected OGM2 - with OGM2
selected, callers cannot leave messages (see page
"Remote
Make sure you are using the correct remote security code
operation
doesn't work."
Check that you are using a suitable tone-dialling phone.
Some cordless or mobile phones do not generate
continuous tones and so are not ideal for remote operation.
Don't leave more than 10 seconds between key
presses; otherwise, your call will be cut off.
Using your Speakeasy 17 on a PBX
"Last Number When you first make a call, try pressing the REDIAL/ PAUSE
Redial and or
button for a pause between the outside line
memory dialling access digit (e.g. 9) and the telephone number.
don't work on
You should later be able to redial the number.
a PBX.
When storing numbers in memory, you can include
the outside line access digit (e.g. 9) and pause (P) if
necessary, with each number.
If your PBX requires you to wait for a second Dial
tone before dialling the telephone number, press the
REDIAL/PAUSE button for a pause between the
access digit and the number.
Binatone Help Line - 0845 345 9677
Edited by Foxit PDF Editor
Copyright (c) by Foxit Software Company, 2004
For Evaluation Only.
23).
Calls are charged at Local Call rate.
33