To Adjust The Speakerphone Volume; To Switch Between The Handset And The Speakerphone; To Mute The Mouthpiece Or Microphone; Voice Message Waiting Quick Dial (1571) - Binatone Acura 3000 User Manual

T elephone operation continue...
To adjust the
speakerphone
volume
To end a call
To switch
between the
Handset and the
Speakerphone
To mute the
mouthpiece or
microphone
1
2
LCD screen
backlight
Voice Message
Waiting Quick
1
Dial (1571)
2
Binatone Help Line - 0845 345 9677
During a call;
Adjust the volume of the speakerphone to your
comfortable volume level using the VOLUME buttons
located on the top of the Base unit.
The display shows the volume level from 1 to 6,
in the lower left corner of the LCD Screen.
Replace the Handset on the Base unit cradle or
press the SPEAKERPHONE button on the Base
unit.
During a phone conversation through the Handset
press the SPEAKERPHONE button to speak
hands-free.
The Speakerphone icon on the display and the
Speakerphone light next to the button will turn on,
but conversation remains through the Handset until
the Handset is replaced on the Base unit cradle.
While in speakerphone mode, lift the Handset to
enable a private conversation.
During a call, you can mute the microphone
or the mouthpiece so that the person on the
other end cannot hear you.
Press the MUTE button.
While the microphone is muted, MUTE
flash in the lower right corner of the display,
and the mute icon will also flash.
Press the MUTE button again to get back
to the call.
The display backlight will turn on for 15 seconds
every time any button is pressed or when ringing is
received.
If you subscribe to your telephone service provider's
voice messaging service, to access your messages:
Press and hold the digit 1 key for more than 2
seconds.
The phone will automatically dial out the common
UK message number 1571.
Note: If the phone is in standby mode it will make
the call in speakerphone mode.
Calls are charged at Local Call rate.
MUTE will MUTE
MUTE MUTE