How To Operate Your Friedrich Zstar - Friedrich ZStar ZQ05 Installation And Operation Manual

How to operate your Friedrich ZStar

Function Controls
Off
Hi
Fan O
Lo
O
Fan
Mode
Warmer Cooler
Temperature
• FOR NORMAL COOLING
1. Turn the Mode switch to the Hi Cool or the Lo Cool setting.
2. Set the Temperature control to the desired temperature point (the mid-point is a good
starting position). If the room temperature is not satisfactory after a reasonable time, adjust the
control to a cooler or warmer setting, as appropriate.
• FOR MAXIMUM COOLING
1. Turn the Mode switch to the Hi Cool setting.
2. Set the temperature control to the coolest temperature point (all the way to the right).
• FOR QUIETER OPERATION
1. Turn the Mode switch to the Lo Cool setting.
2. Set the Temperature control as needed.
CAUTION
When the air conditioner has finished cooling the room and is turned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.
FUNCTION CONTROL
Hi
This dial allows you to select 2 cooling and 2 fan speeds.
Cool
Turn to Off to turn everything off.
Turn to Hi Cool for quick cooling.
Lo
Cool
Turn to Lo Cool to maintain a desired temperature.
The Hi Fan setting provides maximum circulation of filtered room air
without cooling.
The Lo Fan setting is a slow fan speed without cooling.
TEMPERATURE CONTROL
This dial is the thermostat. Turn it clockwise for cooler and
counterclockwise for a warmer temperature.
5
®