Table of Contents
Advertisement
12. Image Files Menu
On
The projector will switch the file when the source settings change.
Off
The projector stays on its active file even when the settings of the source change.
Image 12-20
12.11 Zoom-Focus
The Zoom-Focus setting is only valid when the projector is equipped with TLD lenses.
What can be done ?
When TLD lenses are used, it is possible to store the zoom and focus setting for each file separately.
How to set ?
1. Press MENU to activate the menu bar.
2. Press → to select the Image files item. (image 12-21)
3. Press ↓ to pull down the Image files menu.
4. Use ↑ or ↓ to select Zoom/Focus.
5. Press → to display the choices.
6. Use ↑ or ↓ to select desired choice.
Universal
The same zoom/focus setting will be used for all files.
Unique
The zoom/focus settings will be stored file per file.
Image 12-21
114
R5976629 BARCORLM G5 02/06/2006
Advertisement
Table of Contents
