Table of Contents
Advertisement
7. Use the ↑ or ↓ keys to select Top, Bottom, Left or Right blanking and change the value with ← or → until the desired blanking is
obtained.
Or,
use the ↑ or ↓ keys to select Top, Bottom, Left or Right blanking and press ENTER to change the value indication to a input field
and enter a new value with the keyboard. Press ENTER to accept this value. (image 8-32)
Image 8-30
Image 8-31
8.9
Input Balance
Overview
•
Introduction to Input Balance
•
Adjusting the input balance
•
Input balance for YPrPb signals
8.9.1
Introduction to Input Balance
Introduction: Unbalanced color signals
When transporting signals, there is always a risk of deterioration of the information contained in the signals.
R5976629 BARCORLM G5 02/06/2006
Image 8-32
8. Image Menu
79
Advertisement
Table of Contents
