System Resources; Table 1-7. System Interrupts; Table 1-8. System Memory - HP OMNIBOOK 4100 Service Manual

System Resources

Below are default values for system resources. To see other, non-default possibilities, use the BIOS
Setup utility (see page 3-26), which lists port and audio device configurations in the System Devices
menu.
The tables in this section show typical resource usage as set up by the OmniBook BIOS. Plug-and-
play operating systems, drivers, and BIOS Setup settings may change some of the entries.
0 System timer
1 Keyboard
2 Cascade IRQ 9
3 Free (or COM2 infrared port, if enabled)
4 COM1 (serial port)
5 Audio
6 Floppy drive
7 LPT1 (ECP parallel port)
8 Real-time clock
9 Free (OmniBook 4100/4150B)
Video (OmniBook 4150†)
10 USB and CardBus - assigned by Windows driver
Video Controller (OmniBook 4150B)
11 Free
12 Pointing device
13 Numeric data processor
14 Internal hard disk (primary IDE controller)
15 Internal CD-ROM drive (secondary IDE controller)
† Models called 4150† in this manual have no marking in the serial number,
whereas models called 4150B have 4150 B after the serial number.
00000 - 9FFFF
A0000 - BFFFF
C0000 - CBFFF
C0000 - CFFFF
CC000 - DBFFF*
D0000 - DBFFF*
DC000*- FFFFF
* Approximate boundary.
** Valid uses for memory addresses CC000-DBFFF or D0000-DBFFF:
Upper memory blocks (UMBs).
PC card memory windows.
† Models called 4150† in this manual have no marking in the serial number,
whereas models called 4150B have 4150 B after the serial number.
HP OmniBook 4100/4150

Table 1-7. System Interrupts

Table 1-8. System Memory

System memory
Video
Video BIOS (OmniBook 4100/4150†)
Video BIOS (OmniBook 4150B)
Free** (OmniBook 4100/4150†)
Free** (OmniBook 4150B)
System BIOS
Product Information 1-7