Table 4-1.
Factory Default Environment — PCL Context (continued)
2,6
Symbol Set
6
Spacing
3
Pitch
4
Height
Style
Stroke Weight
6
Typeface
Underlining Mode
Character Text Path Direction
Text Parsing Method
Font ID
Character Code
Symbol Set ID
Presentation Mode
Left Graphics Margin
Resolution
Compression Mode
Raster Height
Raster Width
1
The font characteristics are determined by the default font. The default font can be the factory default font, the user selected default font
from the Operator Control Panel, or from a font cartridge with a default font.
2
User can select default values from the printer's Operator Control Panel for these feature settings.
3
Selectable from the front panel if a fixed-space scalable font was selected as the user default.
4
Selectable from the front panel if a proportional scalable font was selected as the user default.
5
If the default symbol set is WIN31J, the value is 31; otherwise, it is 0—only available on the LaserJet 4PJ, 4LJ Pro, and LaserJet 4V/4MV
printers if the ESC/P SIMM is installed. If the default symbol set is GB2312, the value is 38; otherwise it is 0.
6
For the LaserJet 4PJ and 4LJ Pro printers, the default symbol set is WIN31J, the default typeface is MS Mincho, and the default spacing is
proportional. For the LaserJet 4V/4MV printer, the default symbol set is Roman-8, default typeface is Courier, and spacing fixed;
Japanese customers must explicitly change the defaults if desired. For the LaserJet 4LC printer, the default symbol set is GB2312,
default typeface is Sim Sun, and the default spacing is proportional. For the LaserJet 5L, 5Si, 5SiMx, 6P, 6MP printers and the LaserJet 5Si
Mopier, the default symbol set is PC-8.
FONTS
UNDERLINING
CHARACTER TEXT PATH DIRECTION
TEXT PARSING
5
FONT MANAGEMENT
RASTER GRAPHICS
1
Roman-8
Fixed
10 cpi
12 point
Upright
Medium
Courier
Off
0 (horizontal)
0 or 31
0
0
0
3 (Print image along the physical page
width)
0
75 dpi
0
N/A
Logical Page Width
Print Environment 4-3