Hp Laserjet 5P And 5Mp Printers - HP PCL 5 Comparison Manual

HP LaserJet 5P
and 5MP Printers
Japanese typefaces, also applies to the LaserJet 4LC
printer's Chinese typefaces with the following differences.
The default values for the Text Parsing Method command
are different for the HP LaserJet 4LC. These default values
are 0 or 38 (provided the default symbol set is GB2312,
otherwise it is 0). Also, the examples in this section can be
used for the Chinese fonts, provided the symbol set value
field in the Symbol Set command is changed to 18C (for the
GB2312 symbol set) and the typeface value in the font
selection command string is changed to one of the Chinese
fonts [for example, the Japanese font selection command
?(19K?(s1p10v1s4b2852T should be changed to
?(18C?(s1p10v1s4b37058T ].
The HP LaserJet 5P and 5MP printers were released March
6, 1995. These printers are similar to the HP LaserJet 4P
printer except that they are designed to run faster, have an
MP paper tray in place of the manual feed slot, and have a
reduced control panel similar to the HP LaserJet 4L
printer. The HP LaserJet 5P / 5MP printer's maximum
print speed is 6 pages per minute (HP LaserJet 4P runs at
4 ppm) and has a print resolution of 600 dpi.
Another new feature on this printer is an IrDA-compliant
infrared serial I/O port located on the front of the printer.
PCL operation is almost identical to that of the HP
LaserJet 4 Plus printer. (Refer to Table 1-1, HP LaserJet
Printer Feature Comparison, for the specific PCL
implementation.)
Printer-Specific Differences 2-73