Hp Color Laserjet Printer - HP PCL 5 Comparison Manual

For the hp laserjet iii hp laserjet iiid hp laserjet iiisi hp laserjet iiip hp laserjet 4 family hp laserjet 4000 series hp color laserjet hp color laserjet 5/5m hp laserjet 5 family hp laserjet 6 family hp deskjet 1200c hp deskjet 1600c
Hide thumbs Also See for PCL 5:
Table of Contents

Advertisement

HP Color LaserJet
Printer
Table 2-14. PCL Feature Additions for HP Color LaserJet Printer
Feature
AppleTalk Configuration
Assign Color Index
Color Components 1, 2, 3
Color lookup Tables
CR (Color Range—HP-GL/2)
Configure Image Data
Download Dither Matrix
Download Pattern
Foreground Color
Gamma Correction
Monochrome Print Mode
NP (Number of Pens—HP-GL/2)
Palette Control
Palette Control ID
2-70 Printer-Specific Differences
As its name implies, the HP Color LaserJet printer is a
color laser printer. This 300 dpi printer adds several new
features to the PCL 5 language. These new features are
summarized in the table below and are described in detail
in the PCL 5 Color Technical Reference Manual (part
number 5961-0940). The printer also supports logical
operations, the HP-GL/2 Merge Control command, and
pixel placement (both PCL and HP-GL/2 commands). These
commands are described in the HP LaserJet 4L section of
this chapter and also in the PCL 5 Color Technical
Reference Manual.
Status
Modified
In addition to supporting the RENAME, JOB, and TYPE
key values, this printer also supports the ZONE value.
New
Assigns the three current color components to the specified
palette index number.
New
These three commands specify the three color components of
any new color entry in the color palette.
New
Enables and specifies color lookup tables to map color input
data into a new output range based on point-by-point
conversions. A lookup table is specified for each primary
color.
New
Sets the range for specifying relative color data.
New
Configures the printer for color imaging—establishes a
modifiable color palette, sets the pixel encoding mode, and
sets the number of bits per index and per primary color.
New
Specifies a single dither matrix for all three primary colors.
New
Downloads user-defined patterns, including color patterns,
to the printer.
New
Sets the foreground color to the specified index of the
current palette.
New
Specifies the gamma correction to be applied equally to each
primary color.
New
Provides a means to convert a color page to a quick-printing
gray-scale equivalent.
New
Resizes the palette after the IN or ?*v#W commands.
New
Provides a mechanism for marking and deleting palettes.
New
Identifies a palette to be used for some of the palette control
functions.
Comments

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents